Electric car Vehicle end connector gun
16A Single Phase
16A Three Phase
32A Single Phase
32A Three Phase
The charging gun is configured with a vehicle end plug that charges an electric vehicle (EV) in an alternating current (AC) manner through a vehicle port.The product complies with the requirements of the IEC 62196.1/2 standard.
Advantages and characteristics
1.The appearance of the product is beautiful and generous.
2.Excellent ergonomic design, good hand feel, comfortable and convenient to use
3.Safe and reliable, excellent material selection
4.Terminal anti-shock design
5.All live parts are completely sealed
6.Colors and labels can be customized
7.Optional riveting, screwing
8.Products are certified by TUV and DEKRA
L1: Single three-phase AC phase line
L2: Three-phase AC phase line
L3: Three-phase AC phase line
N: Single three-phase AC neutral line
PE: Protective ground wire
PP: Charging connection confirmation
CP: Control Guide
Charging connection interface
IEC 62196-2 Connector
Impact Of External Force
Weight 2Tone roll over + Drop from 2m
Withstand Pollution Level
Flame retardant Level
Copper core + silver plated
Use and maintenance:
1.The AC outlet must match the AC power plug of the charger.
2.The AC voltage should be stable and the variation should not exceed 220V ± 10%.
3.Charging operation procedure: a. Turn on the power lock switch b of the vehicle, connect the charging plug to the body charging socket c, and connect the power plug to the mains socket.
4.After the charger is powered on, when the wiring is correct, the power indicator light is on, and the 1-30A charging current indicator lights up all the way to constant charging and the second way constant charging indicator is on. It is better to charge the battery for more than 10 hours under power loss.
5.The charging process changes as follows: the first stage constant current 25A charging for about 6 hours; the second stage constant voltage charging for about 3 hours; finally entering the floating charge stage, at this time, the floating charge light will be on, and the charging current indicator will only light 1-2. Only the fan stops rotating. When the enclosed light is on, the battery is fully charged.
6.After the battery is fully charged, or when any shutdown is required, the power input must be disconnected before disconnecting the charger from the battery.