Auto Turbocharger for Hyundai Chrorus Bus D4AL

GT1749S-JF122002 Detail Why choose us: 1.The products have passed the balancing test and the high speed GHRA balancing test 2.We usually have some products in stock, in case of the clients purchase urgently. And if the order is minimal, we can also Delivery the goods on time. 3.The clients can...
Chat Now

Product Details

GT1749S-JF122002

image002

Detail

image003

image005

image007

image009

image011

 Why choose us:

1.The products have passed the balancing test and the high speed GHRA balancing test
2.We usually have some products in stock, in case of the clients purchase urgently. And if the order is minimal, we can also Delivery the goods on time.
3.The clients can have their own forwarders to ship the products to the destination


We have any auto parts you need, please contact us, thanks.

image013


Turbocharger Knowledge:

What should you pay attention to in a turbocharged car?

1, good engine oil is very important

Due to the high temperature of the turbocharger during use and its special structure, there are special requirements in the selection of oil. The oil used in the maintenance of ordinary gasoline engine models cannot meet the requirements for use of turbocharged models. Therefore, it is necessary to use the turbocharged vehicle-specific oil during the maintenance process.

image014

2, clear carbon

Since the turbocharger system of the "T" car does not play a big role in many cases when driving on urban roads, long-term traffic jams may cause carbon deposits. Excessive carbon deposits can affect both engine operation and the turbocharger system. It is recommended that the owner remove carbon deposits from the vehicle during maintenance during 20,000 to 30,000 kilometers.

image016

3, keep the turbine clean

The biggest feature of the turbine engine is its high power and low fuel consumption. It relies on its precise design and manufacturing process, and it also determines its harsh working environment. Therefore, it has very high requirements for the cleaning and protection of lubricating oil. The frictional damage of impurities and components is very large. Such as large particle pollutants, when the engine speed reaches 4000-6000 rpm, the neck, cylinder wall and bearing surface will be quickly drawn into strips; small particles of pollutants will cause pits and spots on the surface of the machine. Fragmentation is prone to occur at high speeds.

image018


Inquiry